Mold Always Follows a Flood
Once a flood invades your home, the mold isn’t far behind. It won’t wait for the water to recede or for your home to dry out. In 24 to 48 hours you can expect that mold growth has begun and there is only so much you can do until the moisture is removed. Before you start the cleanup, contact your insurance agent and take pictures of the damage.
Following that, there are several things you can do to hurry the cleanup along.
• Eliminate standing water using pumps and wet/dry vacuums.
• Discard items in the flooded area that will not be restored.
• Send items that are to be restored out for restoration.
• Put undamaged items into storage to be brought back later.
• Treat wet areas with disinfectant to minimize the negative effects of bacteria.
• Tear out damaged sections of walls and floors but not structural components.
Remove the Moisture From What Remains
Typically, this means opening windows and operating fans to circulate the air and send the moisture out of the house. You can find nearby restoration specialists in Sanibel, FL, who will bring their experience and specialized equipment to help with the drying process.
It Is Never Too Soon to Start Looking for Mold
While this moisture removal is underway, use your eyes and nose to look for evidence of mold growth. Assume you will find some. A mold problem can be addressed even if your house Is still wet, but removal cannot be declared complete until the house is dry and carefully inspected. Also, bear in mind that mold needs to be removed. Covering mold with caulk or paint is not an effective method of control.
Don’t Finish the Restoration Until You Are Certain That the Mold Is Gone
Before you start the final restoration, you want to make certain that mold growth is no longer a problem. You didn’t go through all this effort only to bury mold behind walls and under floors. Your restoration specialists can help you determine that you are ready to complete the restoration.